[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Steve and Frank,
Thanks for your info on the EV shaft match-up.
Does anyone have a strong preference concerning v-belt vs. chain? Steve, I know
you use both. As of right now I'll be using whatever I find with a metric bore
first, but if there is a good reason to use one over the other . . .
Thanks,
Amir
----- Original Message -----
From: Steve Tyng <stevet-at-stcharlesmd.com>
Date: Friday, February 13, 2004 0:36 am
Subject: RE: AFV of the Month for February 2004
> Frank wrote:
>
> >For "belt" tensioning, I used Steve Tyng's basic approach
>
> I prefer "eloquent approach" ;-)
>
> >As far as chain tension, I simply placed the assembly in the
> >right position and then drilled some holes to bolt it in
> >place.
>
> I concur. That+s what I did on my secondary reduction (chain
> driven) section.
>
> Steve T.
>
>
>