[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "STEVE" <joseq-at-telus.net>
Subject: RE: Wheel Spacing
Date: Mon, 3 Nov 2003 23:49:45 -0700
Reply-To: tanks-at-rctankcombat.com 


RE:

>    I figured that the uneven spacing was to put an equal amount of weight
> on each wheel - but if psi per wheel is a
factor......................................................................
......................................then the tank must weigh less at the
front than at the back, and they would distribute the wheels to equalize the
pounds per square inch on each axle.

Steve "only literature will settle it" Gusikoski