[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Steve Tyng" <stevet-at-stcharlesmd.com>
Subject: RE: Test. T17 update
Date: 7 Jul 2003 09:19:00 +0800
Reply-To: tanks-at-rctankcombat.com

Thanks for the thought's Chris.  I'm contemplating several ideas with the chain idea 
being one of them.  Let you know which direction I go.

Steve

 -----Original Message-----
From: tanks-at-rctankcombat.com [mailto:tanks-at-rctankcombat.com]
Sent: Sunday, July 06, 2003 6:50 PM
To: tanks-at-rctankcombat.com
Cc: stevet-at-stcharlesmd.com
Subject: RE: Test. T17 update


you could bolt some bicycle chain in every other link around the circle you cut out 
of the hull.  Lathe out a another groove in your 2" nylon wheels for the chain. 
Ether add a sprocket with every other tooth grinded out or replace the drive wheel 
with the sprocket.  See if it works.  you can do the same thing with a geer with the 
teeth on the inside but it might be hard to find one.

hope this helps
Chris

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?page=features/virus