[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: "Steve Tyng" <stevet-at-stcharlesmd.com>
Subject: RE: traction + Slippage
Date: 6 Feb 2003 12:51:00 +0800
Reply-To: tanks-at-rctankcombat.com

Don't you mean pull the turret off the top of the Cub Cadet? ;-)


 -----Original Message-----
From: tanks-at-rctankcombat.com [mailto:tanks-at-rctankcombat.com]
Sent: Thursday, February 06, 2003 11:55 AM
To: tanks-at-rctankcombat.com
Cc: stevet-at-stcharlesmd.com
Subject: RE: traction + Slippage

Oops, better pull that mower engine out of the hull!

 -----Original Message-----
From: SteveT44 [mailto:SteveT44-at-comcast.net]
Sent: 06 February 2003 12:35
To: tanks-at-rctankcombat.com
Subject: RE: traction + Slippage

Steve wrote:

>has anyone considered rubber or foam lining on the wheels and inner

The T005's drive wheels are wrapped in 1/4" soft rubber.  I had slippage on my first 
(and only one so far) test run but I hadn't really tensioned the tracks well.  I'll 
be tinkering with my track setup at Frank's on Saturday to see if I can get some 
better results.

>Has anyone tried using IC power instead of electric for their projects?

Internal combustion engines are prohibited in the rules.

Steve Tyng