[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Ray, if the switch works I'll figure a price and let you know. It will be a month
or two before I get to that point in the project. If your planning on using that
Jameco solenoid you should get it now. Apparently it is on closeout.
Steve
-----Original Message-----
From: tanks-at-rctankcombat.com [mailto:tanks-at-rctankcombat.com]
Sent: Tuesday, December 03, 2002 8:16 PM
To: tanks-at-rctankcombat.com
Cc: stevet-at-stcharlesmd.com
Subject: Re: trigger pull
steve ,
i would be intrested in one of these if the price is not to high.
thanks
ray schwartz
louisiana
On 2 Dec 2002 09:40:00 +0800 "Steve Tyng" <stevet-at-stcharlesmd.com>
writes:
> Bryan, I'm planning on using this monster 24V pull solenoid I
> purchased from Jameco electronics. Here's the link to the part,
>
>
http://www.jameco.com/cgi-bin/ncommerce3/ProductDisplay?prmenbr=91&prrfnb
r=3332&cgrfnbr=501&ctgys=
>
> It's going to be fired using the following RC relay based switch,
>
> http://www.capable.on.ca/rcstuff/onoff.htm
>
> I've purchased enough parts to build ten of these switches. If the
> first one works out OK I could build some for others for minimal
> cost. Of course, a servo activating a switch will work fine also.
> That's what all the warship guys using solenoid valves do.
>
> Steve, T5
>
> -----Original Message-----
> From: tanks-at-rctankcombat.com [mailto:tanks-at-rctankcombat.com]
> Sent: Monday, December 02, 2002 6:45 AM
> To: tanks-at-rctankcombat.com
> Cc: stevet-at-stcharlesmd.com
> Subject: trigger pull
>
>
> hey guys
>
>
> what are you guys useing for trigger pull? are you useing just a
> servo, what is the ROF with a servo. any one useing other then a
> servo.
>
>
> thx
> Bryan Boucher
>
>
>
"they that can give up essential liberty to obtain a little temporary
safety deserve
neither liberty nor safety"
benjamin franklin,historical review of pennsylvania ,1759
________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com