[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
From: ray schwartz <ray.schwartz-at-juno.com>
Subject: Re: trigger pull
Date: Tue, 3 Dec 2002 19:20:31 -0600
Reply-To: tanks-at-rctankcombat.com

steve , 
i would be intrested in one of these if the price is not to high. 
thanks 
ray schwartz 
louisiana

On 2 Dec 2002 09:40:00 +0800 "Steve Tyng" <stevet-at-stcharlesmd.com>
writes:
> Bryan, I'm planning on using this monster 24V pull solenoid I 
> purchased from Jameco electronics.  Here's the link to the part,
> 
>
http://www.jameco.com/cgi-bin/ncommerce3/ProductDisplay?prmenbr=91&prrfnb
r=3332&cgrfnbr=501&ctgys=
> 
> It's going to be fired using the following RC relay based switch,
> 
> http://www.capable.on.ca/rcstuff/onoff.htm
> 
> I've purchased enough parts to build ten of these switches.  If the 
> first one works out OK I could build some for others for minimal 
> cost.  Of course, a servo activating a switch will work fine also.  
> That's what all the warship guys using solenoid valves do.
> 
> Steve, T5
> 
>  -----Original Message-----
> From: tanks-at-rctankcombat.com [mailto:tanks-at-rctankcombat.com]
> Sent: Monday, December 02, 2002 6:45 AM
> To: tanks-at-rctankcombat.com
> Cc: stevet-at-stcharlesmd.com
> Subject: trigger pull
> 
>  
> hey guys
> 
> 
>     what are you guys useing for trigger pull? are you useing just a 
> servo, what is the ROF with a servo. any one useing other then a 
> servo.
> 
> 
>                                             thx
>                                                   Bryan Boucher
> 
> 
> 

"they that can give up essential liberty to obtain a little temporary
safety deserve 
neither liberty nor safety"
benjamin franklin,historical review of pennsylvania ,1759


________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com