[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Cool, that will do.
The width is a bit more discretionary anyway.
I guess you could call and ask.
A standard V belt is what? 3/8 - 9/16, so that x5 is 1.8 - 2.8 plus the
gaps 2" - 3"?
If it's too wide a utility knife could change a 5 rib to a 4 rib.
Let's hope they are less than $135 each.
After Franks "zombie roaming the earth forever" statement I'm starting to
think this might be the way to go.
The Gold Label may be the answer to how to keep the track from flying off
the idler wheels in a turn.
"Brian Kraack" <bkraack-at-siscom.net>-at-rctankcombat.com on 06/05/2002 10:06:58
Please respond to tanks-at-rctankcombat.com
Sent by: tanks-admin-at-rctankcombat.com
Subject: Re: tracks
Here's a site with belt lengths, but not widths ...
----- Original Message -----
Sent: Monday, June 03, 2002 4:15 PM
Subject: RE: tracks
> That was a good link.
> Do you have one that gives the dimensions of the belts instead of
> Goodyear/Gates/Napa part numbers?
> Brian Tomsa